When our self-contained series will not meet your needs then the WKSL split design will provide the flexibility needed to create an ideal installation or deal with unusual site problems. BREEZAIRE WKSL Series cooling systems are special split systems that allow mounting of the cooling (evaporator) module in the enclosure to be cooled and the exhaust (condenser) module as far as 50 feet away. The systems are designed when installed in a properly constructed enclosure to provide a constant selectable temperature between 48 and 63 degrees Fahrenheit while maintaining 50 to 75 percent relative humidity.
WKSL Series systems are designed for easy installation by any, properly equipped and qualified air conditioning or refrigeration service technician. Two copper tubes and low voltage wiring connect the two modules and power is hard-wired to the units using adequately sized 110 AC volt electrical sources. These systems must be charged with refrigerant during installation. The WKSL series uses the Sentry III+ digital control system for complete control of the enclosure conditions.
The WKSL series is our Split system which is a two-piece unit, an evaporator fan coil which is the cold indoor unit and then we have the condenser which is where the hot is being produced, they are connected with copper line sets and have two low voltage wires that let the condenser know when to come on. This series is recommended when a customer cannot vent the rear side of a self-contained unit.
All Breezair products are manufactured beforehand and have the lead times below:
- Standard Beige units (1-3 weeks)
- Black Stainless Steel (2-4 weeks)
- Any unit that is being modified (2-4 weeks)
- Model: WKSL 2200
- Enclosure Volume: 265 cu. ft.
- Electrical: Fan/Coil (1 Amp); Condenser(4 Amps)
- Dimensions (in): Fan/Coil: 14.25W x 14.125H x 7.75D; Condenser 14.25W x 14.125H x 11.00D
- Weight: Fan/Coil (25 lbs.) Condenser (35 lbs)